Join the 155,000+ IMP followers

www.waterplant.tech

NPSH and Reverse-Flow Testing Verify Vertical Turbine Pumps Before Shipment 

National Pump Company's Glendale and Lubbock labs test flows up to 20,000 GPM, hydrostatic pressures to 1,500 psi and motors up to 1,000 hp.

  www.nationalpumpcompany.com
NPSH and Reverse-Flow Testing Verify Vertical Turbine Pumps Before Shipment

National Pump Company (NPC), a manufacturer of vertical turbine pumps, operates test labs in Glendale, Arizona, and Lubbock, Texas, where customers can evaluate pump performance and operating characteristics before shipment and installation.

Hydrostatic, Mechanical Run and Vibration Testing
Both labs perform hydrostatic testing at pressures from 250 to 1,500 psi, as well as mechanical run and vibration testing. When the pump is tested as a unit with the job motor, vibration values can be measured in three planes, in inches per second RMS or millimetres per second RMS. The scope of mechanical run testing depends on pump size and power rating.

Lubbock Lab: Reverse-Flow and Performance Testing to 10,575 GPM
The Lubbock lab supports reverse-flow testing and performance testing with flow capacities up to 10,575 gallons per minute (GPM) through a 12-inch line. It handles test pressures up to 740 psi and pump bowl sizes up to 24 inches. Lab drivers cover a range of horsepower ratings and speeds, and customer motors up to 300 hp at 460 V can be accommodated.

Glendale Lab: NPSH Testing at Flows up to 20,000 GPM
The Glendale lab additionally offers net positive suction head (NPSH) testing for applications in which suction conditions are critical. Using magnetic flow meters, it tests flows up to 20,000 GPM through a 20-inch line, with pressures up to 740 psi and bowl sizes up to 32 inches.

Lab drivers from 25 to 450 hp are available at multiple speeds, and customer motors can be tested up to 600 hp at 460 V and up to 1,000 hp at 4,160 V. Variable frequency drive capability extends to 550 hp at 460 V. A 7.5-ton bridge crane is used for pump handling, and longer pumps can be accommodated through sectional assembly over the test pit. Virtual witnessing is available for all pump tests carried out at Glendale.

Additional Context
This section details technical specifications and competitive benchmarking not included in the original news release.

SIMFLO, another US manufacturer of vertical turbine pumps, operates three test facilities. Its largest, the East Campus in Lubbock, Texas, is specified for flows up to 44,000 GPM, pressures up to 1,500 psig and motors up to 2,000 hp at 460, 2,300 or 4,160 V with VFD, using test caissons up to 80 ft deep and a 500,000-gallon tank. NPC's Glendale lab is specified for up to 20,000 GPM and customer motors up to 1,000 hp. Both companies offer NPSH testing for vertical turbine pumps as well as remote or virtual witnessing of tests.

Edited by Aishwarya Mambet, Induportals Editor, with AI assistance.

www.nationalpumpcompany.com

  Ask For More Information…

LinkedIn
Pinterest

Join the 155,000+ IMP followers

International